Icom F4001 02 DTC 403-470mhz UHF 4 watt 16 channels radio kit. Radio includes charger, battery, belt clip and whip antenna. 2 Year factory warranty.
This radio is also available in the higher frequency split (450-512mhz) for special order. Please contact us through email or phone to place your order for this frequency split.
IC-F4001 02 DTC
Simple operation for instant communication
The IC-F3001 series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action — even while wearing gloves.
Easy to hear in noisy areas
The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments.
Typical with internal speaker
Longer operating time
A new high efficiency FET of the IC-F3001 series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000mAh battery pack. Even when used with the BP-264, the radio offers 14* hours of operating time.
* Tx:Rx:Standbye=5:5:90. Power save function ON.
Weather resistant, dust protection, military rugged
While the radio is a compact unit with a height of only 111mm (43⁄8 inch), the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MIL-STD-810 environmental test. In short, the IC-F3001 series is built rugged!
Internal VOX capability for hands-free operation
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004 can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Selective calling, quiet stand-by and more
2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The radio "stun" function disables a radio over the air and the "revive" function restores the stunned radio.
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
Low battery alert
Talk around function
MDC PTT ID and emergency
2-step power save
Time out timer
Lone worker function
(Rx and Tx)*
IC-F3001 136-174 MHz
IC-F4001 400-470 MHz, 450-512 MHz
Number of channels Total 16
Type of emissions 16K0F3E/11K0F3E
Channel spacing IC-F3001 12.5 kHz/25 kHz, 15/30 kHz
IC-F4001 12.5/25 kHZ
PLL channel step IC-F3001 2.5 kHz, 3.125 kHz (VHF)
IC-F4001 5 kHz, 6.25 kHz (UHF)
Power supply requirement 7.2V DC nominal
70 mA (standby)
250 mA (rated audio)
1.25 A (high) IC-F4001
330mA (internal SP)
Antenna impedance 50Ω
Operating temperature range -30°C to 60°C; –22°F to +140°F (radio only
(Projections not included) 58×111×31.0 mm; 29⁄32 × 43⁄8 × 17⁄32 in. (with BP-264)
Weight 330g; 11.6oz (with BP-264)
270g; 9.5 oz (with BP-265)
Spurious emissions 70dB typ.
Max. frequency deviation ±5.0 kHz/±2.5 kHz (wide/narrow)
Frequency stability ±2.5ppm
FM hum and noise 46/40dB typ. (wide/narrow)
Output power 5 W, 2W or 1W Hi, L2, L1)
4 W, 2W or 1W (Hi, L2, L1)
Audio harmonic distortion
(AF 1kHz 40% deviation) 1.0/1.5% typ. (wide/narrow)
Ext. microphone connector 3-conductor 2.5 (d) mm (1⁄10")⁄2.2kΩ
Sensitivity 0.25 µV (typ.) at 12 dB SINAD
Adjacent channel selectivity 73/65dB typ. (wide/narrow)
Spurious response rejection 70 dB (typ.)
Intermodulation rejection 74dB typ.
Hum and noise 52/47dB typ. (wide/narrow)
Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8")
Audio output power (at 5% distortion)
Internal SP (w/12Ω load)
External SP (w/8Ω load)